Movcam.com

BNC cable:Transmit video,connectig upper junciton box to camera and bottom junciton box to monitor

Fix it on the front side of mounting stage for supporting focus receiver. Standard configuration of AvantS, optonal for all other systems.

Docking bracket for AvantS and D200, it used for hanging sled and arm, size 5/8”, fit on the 15.8cm tripod, hanger for hanging the arm, holes in the middle for putting allen wrenches and tools.

Motor rod bracket, post diameter 15*150mm, it’s used for installing focus receiver, for Pro-maxA/Pro-max

camera power cable: connecting upper junction box to camera

AV cable: transmit video, conneting from camera to upper junction box. Use it if camera has no video out for BNC.

Tool for pinching screws, 3 sizes:4mm/5mm/6mm

Docking bracket for D202, it used for hanging sled and arm, size 5/8”, fit on the 15.8cm tripod, hanger for hang the arm, holes in the middle for putting allen wrenches and tools.

cable connector

It's installed on sled for supporing monitor. For D200/D201a/D202/D202a/AvantS

Fix camera on dovetail plate, 2 sizes: 3/8″and 1/4″

This cable connecting upper junction box to red camera, supply power to camera.

It’s used for adding weight when adjusting balance, weight 1kg, clamp size 15m,fix it on the conneting post of sled bottom. It's fit for D202/D202A/D204/AvantT/Pro-maxA

Standard Pro-max dovetail plate, lengh 21cm, material aluminium, surface anodized, fit for Pro-max/Pro-maxA

Docking bracket, it's for hanging sled and arm, size 5/8”, fit on the 15.8cm tripod, hanger for hang the arm. Four holes for putting allen wrenches and tools. It can be fitted for Promax/PromaxA/D204

The cable has high quality Lemo connector,it connect bottom junction box to monitor.It's for D204/AvantT/Pro-max

Dovetail plate for D202/D202a/D204, length17cm, material aluminium, surface anodized

Monitor mounting bracket: it can be used for adjusting the monitor angles, use M6 screws to fix on the base.

It’s for locking the sled into yoke of docking bracket, and also for quickly release the arm from vest.

Fix it on post of sled for docking the sled into yoke of docking bracket.